The FIX2-644 is a round, clear flint glass spirits bottle with a tall straight neck and a metallic bronze aluminum screw cap, photographed here alongside its matching rigid gift box. It is aimed at whisky, gin, vodka and rum brands — as well as private-label bottlers and co-packers — that want a clean, heavy-looking shelf presence without paying for a fully bespoke mold. The proportions visible in the photo (broad cylindrical body, generous shoulder radius, thick push-up base) place it firmly in the premium spirits category, most plausibly in the standard 700 ml / 750 ml band, though the exact brimful capacity is confirmed on the technical drawing at quotation.

Bottle Anatomy as Shown in the Photo

From the product image you can observe the following features directly:

  • Body: a smooth, vertical cylindrical wall with no embossing on the main panel, leaving a large uninterrupted area for front and back labels, screen printing or spray decoration.
  • Shoulder and neck: a short, rounded shoulder transition into a tall, straight neck that reads “premium spirits” rather than “value liquor.”
  • Finish: the closure shown is an aluminum screw cap in a brushed bronze tone, which implies an ROPP-style (roll-on pilfer-proof) or pre-threaded neck finish. The exact finish code and thread profile are confirmed with the factory before mold release of your order.
  • Base: a visibly thick base with a deep punt, giving the bottle bottom-weighted stability and the heavy in-hand feel consumers associate with higher price points.
  • Glass: clear flint (extra-flint appearance in the photo). Whether your run uses standard flint or super-flint glass is a quotation-level decision.

Wall thickness, glass weight and brimful capacity are not visible from a photograph; those values are stated on the technical drawing issued with every quotation.

Why This Shape Works for Whisky, Gin and Vodka Programs

Round bottles remain the workhorse of the spirits industry for practical reasons. They run reliably on high-speed filling lines, they nest efficiently in cartons, and they give label designers a predictable, symmetrical canvas. The FIX2-644 adds two upgrades to that formula: a taller neck than a typical value-tier bottle, which elongates the silhouette on shelf, and a metallic screw cap that removes the cost and supply risk of natural cork while still looking premium.

For gin and vodka brands, the clear flint glass shows off liquid clarity and any botanical infusions. For whisky and aged rum, the same bottle accepts amber spray coating, full-body painting or a tinted sleeve if you want UV protection and a darker brand look. Because the main panel is flat and unembossed, the same physical mold can serve multiple SKUs in a range simply by changing decoration — a real cost advantage when you are building a portfolio.

Closure and Tamper Evidence

The cap shown is a metallic screw closure. For spirits duty, buyers typically specify an ROPP aluminum cap rolled on at the filling line, which provides both the thread and the tamper-evident breakaway band in a single operation. If your co-packer is not equipped for roll-on capping, a pre-threaded screw cap or a bar-top synthetic cork can be evaluated instead — confirm compatibility with the factory, since the neck finish must match the closure system. Liner material (EPE, Saranex or tin-saran equivalents) is selected based on alcohol strength and shelf-life targets, and liner specs are confirmed at quotation.

Gift-Box Ready Retail Presentation

The photo shows the bottle next to a fitted rigid gift box, and that pairing is deliberate. Many of our spirits customers order the FIX2-644 as part of a gift-pack program for holiday seasons, duty-free listings or limited editions. We can supply the glass only, or coordinate the bottle together with a printed rigid box, paperboard tube or folding carton through our packaging partners so that bottle dimensions and box insert dimensions are engineered together. If you already have a box supplier, we provide the exact bottle outline drawing so your insert and tolerances are right the first time. Tell us during inquiry which route you prefer.

Decoration and Customization Options

The plain cylindrical body is a blank canvas. Commonly requested finishes on this shape include:

  • Single- and multi-color screen printing (ceramic or organic inks) directly on the glass
  • Frosted (acid-etched look) or matte spray coating, full or partial
  • Full-body color spray in glossy, satin or metallic effects
  • Hot-stamp foil and decal application for metallic logos and fine detail
  • Embossed or debossed branding in the glass itself, if you later convert this shape into your own exclusive mold

Decoration layouts are proofed on physical samples before mass production. For a fully proprietary silhouette, ask about exclusive mold development — tooling cost and ownership terms are quoted case by case.

Quality Control: ASTM C147, ISO 7459 and ISO 7458

Every production run of the FIX2-644 is inspected against internationally recognized glass-container test methods. Internal pressure resistance for carbonated-adjacent or high-strength filling conditions is verified per ASTM C147 where applicable. Thermal shock endurance is tested per ISO 7459, which matters if your filling line includes hot-fill steps, tunnel pasteurization or aggressive wash cycles. Resistance to internal pressure per ISO 7458 and annealing quality (residual stress checked by polariscope) are part of the standard QC file. Dimensional checks cover neck finish tolerance, verticality, body diameter and capacity, and cosmetic grading follows an agreed AQL with defect limits documented in your quality agreement. Test reports can be shared with your QA team on request.

MOQ, Sampling and Ordering Process

As a custom model, the FIX2-644 runs to order rather than from standing stock, so minimum order quantities apply and vary with glass type and decoration. Our guide to glass bottle MOQ explained walks through how furnace scheduling, mold cavitation and decoration passes set the floor on order size. The typical workflow is: inquiry with your target capacity and closure choice, quotation with technical drawing, physical sample (plain or decorated), sample approval, then mass production and shipment. If you are new to overseas sourcing, our step-by-step resource on importing glass bottles from China covers Incoterms, packing standards and customs paperwork. When you are ready for pricing, send your annual volume estimate and target market through our contact page and we will respond with a quotation and drawing.

Export Packing and Container Loading

Bottles are packed in export-grade cartons with dividers, palletized and shrink-wrapped on the packing line shown below; fumigation-free plywood pallets or plastic pallets are available depending on destination rules. Carton style (with or without dividers), pallet height and container loading plan are confirmed with your order so that landed cost per bottle is predictable. For gift-pack programs, bottles and boxes can be shipped separately for local assembly or coordinated to arrive together.

The FIX2-644 gives premium spirits brands a proven silhouette, a premium metallic closure and a decoration-friendly body, backed by documented QC and export-ready packing. Share your target capacity, closure preference and decoration concept, and we will return a technical drawing and quotation for review.

Frequently Asked Questions

What capacity is the FIX2-644 glass bottle?

The photo proportions suggest the standard 700 ml / 750 ml spirits band, but capacity is not stated on the image. The exact brimful and nominal fill capacity are confirmed on the technical drawing we issue with every quotation, so please tell us your target fill volume when you inquire.

Is the bronze cap included with the bottle, and is it tamper-evident?

The cap shown is a metallic aluminum screw closure, typically an ROPP-style cap that is rolled on at the filling line and includes a breakaway tamper-evident band. Caps can be quoted together with the bottles or sourced separately; the neck finish must match whichever closure system you choose, so confirm the finish code with the factory before ordering.

Can this bottle be sprayed or frosted in a custom color?

Yes. The smooth cylindrical body accepts full or partial spray coating, frosted (acid-etched look) finishes, screen printing, hot-stamp foil and decals. Decoration colors are matched to your Pantone references and proofed on physical samples before mass production begins.

What is the minimum order quantity for the FIX2-644?

As a custom model produced to order, MOQ depends on glass type (standard flint vs. super flint) and decoration complexity. Plain bottles have a lower floor than multi-pass decorated runs. Send us your annual volume estimate and we will quote the exact MOQ and unit price tiers.

Can you also supply the gift box shown in the photo?

We can coordinate rigid gift boxes, paperboard tubes or folding cartons through our packaging partners so the bottle and insert dimensions are engineered together. If you already have a box supplier, we provide the exact bottle outline drawing so your insert fits correctly.

Which quality tests do you run on this bottle before shipment?

Standard QC includes internal pressure resistance per ASTM C147 where applicable, thermal shock endurance per ISO 7459, internal pressure per ISO 7458, annealing verification by polariscope, dimensional checks of the neck finish and body, and cosmetic grading to an agreed AQL. Test reports are available to your QA team on request.