Glass and aluminium both keep oxygen out and carbonation in, so the decision usually rests on other things: whether the consumer should see the product, whether the pack must be closed again after opening, what filling equipment is available, and how far the goods travel. Aluminium is lighter, unbreakable and blocks light completely. Glass is inert without any coating, shows the liquid, and carries more weight as a premium pack in spirits, wine and cosmetics.
Light protection and product visibility
Aluminium is opaque. No light reaches the product, which removes the risk of light damage in beer and other light-sensitive liquids.
With glass, protection depends on colour. Amber glass filters most ultraviolet light. Green offers less protection, and clear glass offers very little. Our guide to amber and clear glass explains the trade-off.
The other side of that trade is visibility. Clear glass, known in the trade as flint glass, lets the buyer see colour, clarity, fruit pieces or botanicals. If the look of the liquid is part of the selling point, a can hides it.
Lining and contact with the product
Bare aluminium reacts with acidic and salty liquids, so the inside of a beverage can or aluminium bottle is coated with a thin polymer lining that separates metal from product. The lining has to suit the product: acidity, salt and alcohol strength all affect the choice, and can suppliers normally test compatibility before approving a new fill.
Glass needs no lining. The surface in contact with the product is the glass itself, which is chemically inert and does not add or absorb flavour. For products held for long periods, high-strength spirits and fragrance, this is the main technical argument for glass.
Resealing and serving
A standard can is a single-serve pack. Once the tab is pulled it stays open, which suits a drink finished in one sitting and nothing poured in measures over weeks.
Glass bottles take screw caps, corks, stoppers, swing tops, pumps and droppers, so they can be closed and reopened as often as needed. The options are set out in our guide to closures for glass bottles.
Aluminium bottles sit between the two. They take a threaded cap and reseal, though the range of shapes and neck finishes is narrower than in glass.
Weight, freight and breakage
Aluminium is far lighter than glass for the same volume, and cans stack tightly with little wasted space. Filled goods cost less to move, and more units fit on a pallet.
Glass is heavier at every stage and needs dividers and stronger cartons. It can break in transit and in use, and it is not permitted in some venues, including many poolside, festival and stadium settings. Aluminium does not shatter, though it dents.
Filling lines
This often settles the question in practice. Canning lines and bottling lines are different equipment. A can is filled open-topped and closed by a seamer, a machine that rolls the lid onto the can body in a double seam. A bottle is filled through its neck and closed by a capper, crowner or corker matched to that closure.
A filler set up for one cannot simply run the other. Before choosing a pack, confirm what your own line or your co-packer can handle. Both formats can be tunnel pasteurised after filling; our notes on glass bottles on a pasteurisation line describe what the bottle has to withstand.
Carbonation and pressure
Both materials hold carbonation well, since neither lets gas through its wall. A thin-walled can relies on internal pressure for much of its stiffness.
Glass bottles for carbonated drinks have to be designed for the pressure: wall thickness, shape and base all matter, and sparkling wine bottles are noticeably heavier than still wine bottles for this reason. A decorative bottle designed for a still product should not be used for a carbonated one without confirming its pressure rating with the plant.
Shelf perception and decoration
Cans are printed directly around the full body, giving a large, continuous graphic area, and can also be sleeved or labelled. That suits bold artwork and ranges with many flavours.
Glass offers a different kind of distinction: custom shape, weight, embossing, coloured glass, frosting, spraying, screen printing and hot stamping. See our overview of decoration options for glass. In categories where the pack is displayed, gifted or kept on a back bar, consumers generally read glass as the more premium material.
A custom glass shape needs its own moulds, and its cost is quoted per project according to the mould, decoration, quantity and freight terms. Cans are mostly supplied in standard sizes, with the design carried by print.
Recycling
Both are strong here. Aluminium and glass can each be melted and made into new containers repeatedly without the material losing quality, and both are widely collected. Glass can additionally be washed and refilled where return schemes operate. Actual recovery depends on local collection, so check your sales markets before making claims on pack.
Glass and aluminium compared
| Attribute | Glass bottle | Aluminium can or bottle |
|---|---|---|
| Light protection | Depends on colour; amber filters most UV, clear very little | Complete |
| Product contact surface | Bare inert glass | Polymer lining matched to the product |
| Product visibility | Yes, in clear or lightly tinted glass | None |
| Resealable | Yes with most closures; not with crown caps | Cans no; aluminium bottles yes |
| Weight and freight | Heavy; needs protective packing | Light; stacks densely |
| Damage in handling | Can break | Does not shatter; dents |
| Filling equipment | Bottling line with capper, crowner or corker | Canning line with seamer |
| Carbonation | Holds well in pressure-rated bottles | Holds well; pressure stiffens the can |
| Decoration | Shape, embossing, glass colour, printing, frosting, labels | Full-body print, sleeves, labels |
| Recycling | Remelted repeatedly; refillable | Remelted repeatedly |
Where each one wins by category
- Beer. Both are well established. Cans give full light protection and lower freight weight; amber beer bottles suit bottle-conditioned beers, larger sharing formats and brands sold on a traditional image.
- Ready-to-drink cocktails and hard seltzers. Mostly cans, for single-serve convenience and venues that exclude glass. Glass fits higher-strength, multi-serve or gift-oriented versions.
- Spirits. Glass. The product is poured over a long period, has to reseal, and the bottle is a large part of the brand. See the liquor bottle range.
- Wine. Glass for anything meant to be stored or aged and for most still and sparkling wine. Cans work for wines made to be drunk young and outdoors, with a lining approved for wine.
- Cosmetics and fragrance. Glass for perfume, serums and skincare jars, where inertness and appearance count. Aluminium for aerosols, travel formats and some hair and body products.
Buyers also considering PET or HDPE can read our comparison of glass and plastic bottles.
For neighbouring questions, see Amber Glass Jars with Lids Wholesale and Is Glass Packaging Right for Your Product? When It Fits and When It Does Not.
Frequently asked questions
Does a drink taste different from a can than from glass?
It should not, provided the can lining is correct for the product and intact. The liquid touches the lining rather than the metal.
Can one filling line handle both cans and glass bottles?
Not as a rule. Filling and closing are done by different machines, so a producer needs either two lines or a co-packer for the second format.
Is aluminium or glass the more sustainable choice?
Neither wins in every case. Both can be recycled repeatedly; aluminium is lighter to transport, and glass can be refilled where returns exist. The result depends on collection in your market and shipping distances.