Glass bottles are sorted in three ways that matter to a buyer: by glass colour, by body shape and by neck finish, which is the profile at the top of the bottle that the closure grips. Colour decides how much light reaches the product, shape decides how the bottle looks, labels and runs on a line, and the neck finish decides which cap, cork or pump will fit.

Glass colours and what they do

Colour is made in the glass itself, not applied afterwards, so it is uniform through the wall and cannot wear off.

  • Flint (clear). Colourless glass that shows the product as it is. Usual for spirits, juices, sauces and most cosmetics. It gives no meaningful protection from light.
  • Amber (brown). Blocks most ultraviolet light and some of the visible light that damages beer, essential oils and many cosmetic formulas. It is the standard protective colour.
  • Green. Gives some light protection, less than amber, and is traditional for wine, some beers, olive oil and mineral water.
  • Cobalt blue. A deep blue chosen largely for appearance. It filters less of the damaging light than amber does.

If the product is light-sensitive and you still want it visible, the alternatives are a coating, a sleeve or an outer carton. The trade-offs are set out in amber versus clear glass.

Body shape families

General-purpose shapes

A Boston round has a cylindrical body, rounded shoulders and a fairly narrow screw neck. It is the workhorse for oils, tinctures, syrups and cosmetics; see Boston round bottles.

Cylinder or straight-sided bottles have a sharper shoulder and a taller label panel, which suits wrap-around labels and screen printing. Square and rectangular bottles pack tightly in a carton and give flat faces for labels.

A flask is flattened front to back so that it fits a pocket or a hand. It is used mainly for small spirits formats; see our flask bottle page.

Beer and other carbonated drinks

The long-neck beer bottle has a slim neck over a cylindrical body; shorter, squatter versions exist. All are designed to hold internal pressure and to withstand pasteurisation. The swing-top bottle carries a ceramic or plastic stopper with a rubber gasket on a wire bail fixed to the neck, so it can be reclosed by hand. Both types are in the beer bottle range.

Wine bottles

Three silhouettes cover most wine. The Bordeaux style has straight sides and high, pronounced shoulders. The Burgundy style has a wider body with long, sloping shoulders. The Champagne style resembles Burgundy but is made with thicker glass and a deep indentation in the base (a punt) because it has to contain sparkling wine under pressure. The standard size for all three is 750 ml. See wine bottles.

Spirits bottles

Spirits bottles vary more than any other group because the shape is part of the brand. Many share a heavy base, a thick layer of glass at the bottom that adds weight. Our overview of alcohol bottle types goes through them by spirit.

Small formats for cosmetics and laboratory use

Dropper bottles are small round bottles, often amber, closed with a pipette assembly or an insert that releases drops. Vials are small, narrow containers for samples, serums and laboratory work. Roll-on bottles have a ball fitment pressed into the neck so the product is applied directly to the skin. See dropper bottles.

Neck finish families

The finish must match the closure exactly; shape and colour can be changed with far fewer consequences. More in neck finishes explained.

  • Continuous-thread screw. A moulded thread that runs around the neck and accepts a pre-threaded plastic or metal cap, a dropper, a pump or a sprayer.
  • ROPP (roll-on pilfer-proof) aluminium screw cap. A plain aluminium shell is placed on the neck and rolled into the glass threads on the capping machine, forming a tamper-evident band at the same time.
  • Crown. A lip that takes a crimped metal crown cap. It is the standard for beer and other carbonated drinks.
  • Cork and bar-top. A smooth bore with no thread. Wine bottles take a driven cork; spirits bottles commonly take a bar-top, a stopper with a head that is pulled out and pushed back by hand.
  • Crimp neck for pumps. A threadless neck with a ledge onto which a spray pump is crimped by machine. It is typical of perfume and cannot be removed by the user. Screw-neck perfume bottles exist for refillable designs.
  • Lug or twist-off. Short, interrupted threads that engage lugs on a metal cap with a partial turn. It is mainly a jar finish, also seen on wide-necked juice and sauce bottles; see types of glass jars.
  • Swing-top. A neck with a collar or dimples that hold the wire bail of the stopper.

Bottle type, usual finish and typical use

Bottle typeTypical neck finishTypical use
Boston roundContinuous-thread screwEssential oils, tinctures, syrups, cosmetics, chemicals
Cylinder or straight-sidedContinuous-thread screw or ROPPSauces, juices, oils, lotions
Long-neck beerCrownBeer, cider, carbonated soft drinks
Swing-topSwing-top with wire bailBeer, kombucha, oils, home-use and gift bottles
Bordeaux and Burgundy wineCork or ROPP screw capStill wine
Champagne-styleCork with wire cage, or crownSparkling wine
Heavy-base spiritsBar-top or ROPPWhisky, vodka, gin, rum, tequila, brandy
PerfumeCrimp neck for pump, or screwFragrance
DropperContinuous-thread screwSerums, essential oils, tinctures
Roll-onScrew with ball fitmentPerfume oils, aromatherapy, eye and skin care

Bottle types by industry

Wine stays close to the three classic silhouettes in green or flint. Spirits use flint glass in brand-specific shapes with heavy bases. Beer and carbonated drinks use amber or green pressure-rated bottles.

Food uses cylinders and squares for sauces and oils, dark glass for olive oil, and wide-mouth jars with lug caps for anything spooned out. Cosmetics and fragrance use small formats: Boston rounds, droppers, roll-ons and perfume bottles, in flint, amber or decorated glass. Pharmaceutical and laboratory products favour amber rounds and vials.

How to specify a bottle

  1. Capacity. State the fill volume and whether you mean the nominal fill or the brimful capacity; the bottle always holds more than the declared content to leave headspace.
  2. Neck finish and closure. Name the closure system and, if you already have a cap, cork or pump, send its drawing or a sample.
  3. Colour. Flint, amber, green or blue, and whether the product needs light protection.
  4. Weight and size limits. Give any maximum height or diameter set by your filling line, shelf or carton, and say whether you want a light bottle or a heavy one.
  5. Decoration. Label only, or printing, frosting, coating, embossing.
  6. Stock or custom. Say whether an existing shape is acceptable or you want your own mould. The difference is explained in stock versus custom bottles.

With the product, filling process and quantity added, we can match the brief to a suitable plant. Cost and timing are quoted per project and depend on the mould, the decoration, the quantity and the freight terms.

FAQ

What is the difference between a bottle and a jar?

The neck. A bottle has a neck narrower than its body and is meant for pouring or dispensing liquids. A jar has a wide mouth, close to the width of the body, so the contents can be spooned or scooped out.

Can any cap go on any bottle of the same neck diameter?

No. Diameter is only one part of a finish; thread form, height and sealing surface must also match. Always specify the finish, not just the width.

Why do sparkling wine and beer bottles look heavier than still wine bottles?

They hold carbonated liquid under pressure, so the glass is thicker and the shape is designed to spread the load.