Glass jars fall into a handful of shape families, and each family is normally paired with one or two closure types. The shape is mostly a matter of shelf look, labelling and how the product is scooped or poured; the closure is decided by the filling process. A jar that is filled hot or pasteurised needs a finish and cap designed to hold a vacuum, while a jar for dry goods, cosmetics or candles does not.

Shape families

Most jars on the market are variations on the shapes below. The names are trade names, not standards, so confirm the profile on a drawing.

  • Straight-sided jars. A cylinder with almost no shoulder, so the mouth is nearly as wide as the body. Easy to fill, empty and label; used for creams, balms, spreads, spices and candles.
  • Round shouldered jars and Mason-style jars. A round body that narrows slightly at a shoulder below the neck. This is the familiar preserving jar for jam, pickles and sauces; see Mason-style jars.
  • Hexagonal jars. Six flat panels that catch the light and give a hand-made look, popular for honey, jam and small gift packs. The panels limit label width; see hexagon jars.
  • Square jars. Four flat sides with rounded corners. They pack tightly and give a large flat label area.
  • Tapered and wide-mouth jars. The body narrows towards the base, or the mouth is opened up to the full body width, so that a spoon or a hand can reach the bottom. Common for thick or chunky products.
  • Paragon-style jars. A tall, slim round jar with a short shoulder. It shows off whole products such as olives and pickles and takes little shelf width; see paragon jars.
  • Cosmetic cream jars. Small, low jars with thick walls and a heavy base, often frosted or in opal or amber glass.
  • Candle vessels. Straight-sided or tumbler-shaped glass, usually with no thread at all.
  • Apothecary and storage jars. Decorative jars with a glass stopper, a cork or a wooden or bamboo lid, meant to be refilled and kept on display.

Closure families

The closure has to match the jar's finish, which is the moulded top of the jar that the cap grips. The two are specified as a pair.

Lug or twist-off metal caps

A lug cap is a metal cap with several inward tabs that catch on short raised threads on the jar and close with a part turn. Inside is a sealing compound that beds onto the rim. Caps for heat-processed food usually have a button in the centre that is pulled down by the vacuum and pops up when the jar is first opened. This is the standard closure for jam, sauces, pickles and similar foods; see lug cap jars.

Continuous-thread caps

A continuous-thread cap screws on over a full spiral thread and can be opened and closed many times. It comes in metal or plastic and seals through a liner, which is a disc of material inside the cap chosen for the product. It is common on dry foods, spices, supplements and cosmetics. Liner choices are covered in our guide to cap liners.

Clip-top or swing closures

A glass or ceramic lid is held on by a wire bail and seals against a rubber gasket. It is reusable, suits storage jars and gift packs, and is slower to apply on a filling line than a cap.

Cork, wood and bamboo lids

These lids push into or sit on the mouth, sometimes with a silicone ring to grip the glass. They suit dry storage and display. They are not designed to hold a vacuum or to survive heat processing.

Cosmetic lids

Cream jars take plastic or metal screw lids, often with a liner in the lid and sometimes a separate sealing disc under it to protect the product before first use.

How the filling process drives the choice

Start with how the product goes into the jar. If it is filled hot, pasteurised or sterilised in the jar, the pack relies on a vacuum that forms as the contents cool. The finish must be made to the tolerance the cap needs, the sealing compound must suit the process temperature, and the jar itself must tolerate the temperature change without cracking.

Dry goods, cosmetics and candles place no such demand on the seal. Here the closure only has to keep out moisture and dust, stay on in transit and look right, so the choice opens up to continuous-thread caps, cork, bamboo, glass lids or no lid at all. Candle vessels have their own requirement instead: the glass must cope with the heat of the flame as the candle burns down, which is a matter for testing the finished candle rather than the empty jar.

Jar type, typical closure and typical use

Jar typeTypical closureTypical use
Straight-sidedContinuous-thread metal or plastic capCreams, balms, spices, spreads, candles
Round shouldered / Mason-styleLug cap, or a two-piece metal lid on preserving jarsJam, pickles, sauces, drinks
HexagonalLug capHoney, jam, gift packs
SquareLug or continuous-thread capSpices, sauces, dry foods
Tapered / wide-mouthLug capChunky sauces, dips, desserts
Paragon-styleLug capOlives, pickles, whole vegetables
Cosmetic cream jarPlastic or metal screw lid with linerFace cream, body butter, masks
Candle vesselLoose metal, wood or glass lid, or noneContainer candles
Apothecary / storageGlass stopper, cork, bamboo lid or clip-topDry storage, display, bath products

These are the usual pairings, not rules.

What to specify when you enquire

A supplier can only match a jar to your project if the brief covers the points below. Our RFQ checklist for bottles and jars has the full list.

  • Capacity. State whether you mean the fill volume or the brimful volume, and give the product's density if you sell by weight.
  • Mouth size. Wide enough for the filling nozzle and for the consumer's spoon or fingers.
  • Finish and closure. Name the closure type and say whether the pack must hold a vacuum.
  • Filling process. Cold fill, hot fill, pasteurisation or sterilisation, with the temperatures your line uses.
  • Colour. Clear (flint) glass is the default for food jars; amber, green, opal and frosted finishes are used where light protection or appearance calls for them.
  • Height and diameter limits. Your filler, capper and labeller each accept a range of sizes.
  • Label area. Panel width on hexagonal and square jars, straight wall height on round ones.
  • Lid supply. Whether lids come with the jars or from your own cap supplier. If they come separately, someone must check the fit on real samples before production.

Stock shapes for food are listed under glass jars and wide-mouth food jars; vessels for candle makers are under candle jars. For containers with a narrow neck, see the companion overview of types of glass bottles.

FAQ

Can any glass jar be used for hot filling?

No. The jar has to be designed and annealed for the temperature change, and the finish and cap must be a matched pair intended for vacuum sealing. Test samples on your own line.

Are cork and bamboo lids airtight?

They close well enough for dry storage, especially with a silicone ring, but they are not a hermetic seal and are not suitable for heat-processed or perishable food.

Can a stock jar be customised?

Yes, within limits. Colour coating, frosting, printing and custom lids can usually be added to a stock shape without a new mould. Changing the shape, the capacity or embossing a logo into the glass requires a mould. Cost and timing are quoted per project and depend on the mould, the decoration, the quantity and the freight terms.