For small or uncertain volumes, buy stock bottles from a packaging distributor in your own country. You pay more per bottle, but you buy by the case or pallet, receive goods from a local warehouse and carry none of the import risk. Importing direct from an overseas plant, or through a sourcing desk, starts to make sense when you can take full pallets or a container load at a time, have somewhere to store them, and want your own mould or decoration. Most brands begin with the first route and move to the second as they grow.

What each route gives you

A distributor has already done the importing. It has bought in bulk, paid the freight and duty, absorbed any breakage in transit and put the bottles on a shelf near you. What you are paying for is that work, plus the ability to order a small quantity at short notice. The trade-off is choice: you select from catalogue shapes that other brands can also buy, and decoration, if offered at all, is usually limited.

Importing reverses the position. You deal with the plant, or with a sourcing desk acting between you and the plant, and you can specify the glass: your own shape, weight, colour and finish. In return you commit to a larger quantity, plan much further ahead, arrange customs clearance and find space for the pallets when they arrive.

Point of comparisonLocal distributorImporting direct or via a sourcing desk
Order sizeCases or single palletsFull pallets or container loads
Bottle designCatalogue shapesStock moulds or your own mould
DecorationLimited, or arranged separatelySpraying, frosting, printing and stamping can be specified with the glass
Where goods ship fromA warehouse in your countryAn overseas plant, by sea
Import clearance and dutyAlready handled by the distributorHandled by you, your forwarder or your customs broker
Transit breakage riskCarried by the distributor until it delivers to youAllocated by the delivery terms you agree
Planning horizonShortLong; orders placed well ahead of need
StorageLittle neededWarehouse space for pallets
Cash tied upLow per orderHigher per order, and for longer
Unit costHigher, covering the distributor's serviceQuoted per project; depends on mould, decoration, quantity and freight terms

The usual growth path

A new brand rarely knows how much it will sell. Buying distributor stock lets it launch, test demand and change the pack without being left with pallets of the wrong bottle. That flexibility is worth the higher unit cost, and for many small producers it remains the right answer for years.

The picture changes for one of two reasons. Either volume grows to the point where the brand is buying pallet after pallet of the same item and the distributor's margin becomes a large sum, or the brand needs something a catalogue cannot give it: a bottle shape nobody else has, an embossed logo, a particular colour, a decorated finish. Our comparison of stock and custom glass bottles covers that second decision in detail.

There is a middle step. Many overseas plants hold existing moulds that are not in your local distributor's catalogue, so you can import a stock shape, perhaps with your own decoration, before committing to tooling. The quantity a plant will accept for this varies; see how minimum order quantities work.

What changes operationally when you import

Delivery terms

You have to agree who pays for and bears the risk of each leg of the journey. This is set by the Incoterms rule in the contract. A rule under which the seller only hands goods over at the plant or the port of loading leaves the sea freight, insurance and import formalities with you; other rules move more of that to the seller. Our guide to Incoterms for glass bottle orders sets out the common choices.

Customs clearance and duty

Someone must declare the goods at the border and pay any duty and import tax. Most first-time importers appoint a customs broker or a freight forwarder that offers brokerage. Duty on glass containers depends on your country and on the origin of the goods, and it changes over time, so check the current tariff schedule before you compare costs. Our page on import duty on glass bottles explains what to look up.

Inspection before shipment

With distributor stock you can look at a case before buying more. With an import order, a problem found after arrival is on the wrong side of an ocean. Buyers therefore agree a specification and defect standard in advance, approve samples, and have the finished goods checked at the plant before they are loaded. See pre-shipment inspection for glass bottles.

Receiving pallets

A container arrives as a large number of pallets or cartons at once. You need a way to unload it, such as a dock or a forklift, floor space that is dry, and a routine for checking what arrived against the packing list and for noting damage on delivery. Our notes on how glass is loaded into containers and on incoming inspection describe what to expect.

Safety stock

Because the next delivery cannot be hurried, you hold more stock than you would when a distributor is a phone call away. That stock has a cost in cash and space, and it belongs in the comparison. Some brands keep a distributor account open for a similar stock bottle as a fallback.

Signs you are ready to import

  • Your sales of a given bottle are steady enough to forecast several months ahead.
  • You regularly buy that bottle by the pallet rather than by the case.
  • You can store a full delivery and have the means to unload it.
  • You can fund the order from deposit to arrival without straining cash flow.
  • You want a shape, colour, embossing or decoration that distributor catalogues do not offer.
  • You have, or are willing to appoint, a freight forwarder and customs broker.
  • You have a written specification: drawing, capacity, neck finish, closure, packing.
  • Someone on your team has time to manage sampling, approval and shipping documents.

If only one or two of these apply, staying with a distributor is usually the better decision for now. If you are new to buying glass altogether, our first-time glass bottle buyer guide is the place to start.

Where a sourcing desk fits

Importing does not have to mean dealing with a plant alone. A sourcing desk such as Bottle Sourcing matches the project to a suitable plant, checks drawings, coordinates samples and inspection, and prepares export documents; you remain the importer. Our page on working with a glass bottle sourcing agent describes the role, and our comparison of sourcing origins looks at whether China is the right place to buy at all.

Frequently asked questions

Is importing always cheaper per bottle?

Not once everything is counted. Add freight, insurance, duty, brokerage, inspection, storage and the cost of money tied up in stock. For a small quantity those costs, spread over few bottles, can exceed the distributor's price.

Can I import a small trial quantity first?

Sometimes, particularly from an existing mould, but small shipments carry high freight and handling costs per bottle. Whether it is worthwhile is quoted per project and depends on the item, the decoration and the freight terms.

Do I need an import licence?

Requirements differ by country. Many countries ask an importer to hold a registration or identification number for customs purposes. Your customs broker can tell you what applies to you.

Can I use both routes at once?

Yes. A common arrangement is imported glass for established lines and distributor stock for new products, limited editions and emergencies.