One US fluid ounce is 29.57 ml, so 2 oz is 59.1 ml, 4 oz is 118.3 ml, 8 oz is 236.6 ml, 12 oz is 354.9 ml, 16 oz is 473.2 ml and 32 oz is 946.4 ml. To convert ounces to millilitres, multiply by 29.5735; for a quick estimate, multiply by 30.

These conversions are for fluid ounces, a measure of volume. On this page, "oz" means US fl oz unless marked imperial. If a label says "net wt oz", it gives weight and cannot be converted to millilitres without knowing the product's density. The chart shows US and imperial conversions to one decimal place, plus US values rounded to the nearest whole millilitre.

oz to ml chart

Fluid ouncesUS fl oz to mlNearest ml (US)UK fl oz to ml
0.5 oz14.81514.2
1 oz29.63028.4
1.5 oz44.44442.6
2 oz59.15956.8
3 oz88.78985.2
4 oz118.3118113.7
5 oz147.9148142.1
6 oz177.4177170.5
8 oz (1 US cup)236.6237227.3
10 oz295.7296284.1
12 oz354.9355341.0
16 oz (1 US pint)473.2473454.6
20 oz591.5591568.3
24 oz709.8710681.9
32 oz (1 US quart)946.4946909.2
64 oz (half US gallon)1,892.71,8931,818.4
128 oz (1 US gallon)3,785.43,7853,636.9

The cup, pint, quart and gallon labels in the first column are US liquid measures. An imperial pint is 20 imperial fluid ounces, not 16, so those names do not carry across to British recipes.

How many ml in an ounce?

A US fluid ounce is exactly 29.5735295625 ml. The figure follows from its definition: the US gallon is 231 cubic inches, the inch is exactly 2.54 cm, and the fluid ounce is 1/128 of the gallon. NIST lists the result as 29.57353 ml in its table of conversion factors.

The imperial fluid ounce is exactly 28.4130625 ml, one twentieth of the imperial pint of 568.26125 ml, as defined in Schedule 1 of the UK Weights and Measures Act 1985. The difference is about 4%, which is small for a single ounce but adds up: 16 US fl oz is 473 ml, while 16 imperial fl oz is 455 ml.

2 oz to ml

2 US fl oz is 59.1 ml. A 60 ml bottle is close, at 2.03 US fl oz. If a supplier lists both sizes under the same product name, check the capacity on the drawing.

4 oz to ml

4 US fl oz is 118.3 ml, or 118 ml to the nearest whole millilitre. A 120 ml bottle holds about 1.7 ml more.

8 oz to ml

8 US fl oz is 236.6 ml, or one US customary cup. A 250 ml bottle holds 8.45 US fl oz, about 13.4 ml more.

12 oz to ml

12 US fl oz is 354.9 ml, usually rounded to 355 ml. The difference between the conversion and 355 ml is less than 0.2 ml.

16 oz to ml

16 US fl oz is 473.2 ml, or one US liquid pint. A 500 ml bottle holds 16.91 US fl oz, about 26.8 ml more. For an imperial pint, use 568.3 ml.

32 oz to ml

32 US fl oz is 946.4 ml, or one US liquid quart. That is about 53.6 ml less than a litre. A 64 US fl oz growler holds twice that volume: 1,892.7 ml.

Ounce sizes and nearby metric bottle sizes

A bottle catalogue may list a size in ounces, millilitres or both. The metric sizes below are close to the ounce sizes, but they are not exact conversions. Use the supplier's drawing to check the capacity of the bottle you are ordering.

Ounce sizeUS volume (rounded)Nearby metric sizeMetric size in US fl oz
1 oz29.6 ml30 ml1.01
2 oz59.1 ml60 ml2.03
4 oz118.3 ml120 ml4.06
8 oz236.6 ml250 ml8.45
12 oz354.9 ml355 ml12.00
16 oz473.2 ml500 ml16.91
32 oz946.4 ml1,000 ml33.81

For the 1, 2, 4 and 12 oz examples above, the difference is less than 2 ml. For 8, 16 and 32 oz, it is about 13 to 54 ml. Even a small difference can matter when setting a fill volume. Capacity alone does not tell you whether two bottles fit the same carton; compare their height and diameter as well.

Nominal capacity, brimful capacity and fill level

Nominal capacity is the intended fill volume. Brimful (or overflow) capacity is the volume a bottle holds when filled to the rim. Check which measurement a catalogue lists; the brimful figure does not tell you how much product the bottle can hold with the closure fitted and the required headspace.

For example, 16 US fl oz converts to 473.176473 ml, approximately 473.2 ml. A bottle with only that much brimful capacity would leave no headspace at that fill volume. Ask for the capacity tolerance and fill-height drawing, then confirm the fill with your product and closure. Headspace depends on the filling process, temperature and closure; there is no single allowance that works for every bottle. The glass bottle size chart explains the measurements on a drawing.

Fluid ounces are not ounces of weight

A fluid ounce measures volume; an ounce of weight (avoirdupois) is about 28.35 grams. For a product sold by weight, calculate the volume as mass in grams divided by density in g/ml. A jar labelled "net wt 12 oz" therefore needs a capacity based on what goes inside it, plus room for the closure and headspace.

Converting the other way

To convert millilitres to ounces, divide by 29.5735. The ml to oz chart gives the result for common bottle sizes from 5 ml to 3 litres, including 750 ml (25.36 US fl oz). For how many drinks a spirits bottle holds, see how many shots in a fifth.

For bottle shapes and closures, see the 2 oz, 8 oz, 12 oz, 16 oz and 32 oz glass bottle guides. To request a quote, include the required fill volume, product and closure in the quote form.

FAQ

Can I use 30 ml for one fluid ounce?

For a rough estimate, yes: 30 ml is about 1.4% more than one US fl oz. For a conversion chart or fill calculation, use 29.5735295625 ml.

Why does 20 oz round to 591 ml rather than 592 ml?

20 US fl oz is 591.47059125 ml. Rounded directly to a whole millilitre, it is 591 ml. Rounding first to 591.5 ml and then again to a whole number would give the wrong result.

Does a 60 ml bottle hold exactly 2 fl oz?

No. 60 ml is about 2.03 US fl oz; 2 US fl oz is about 59.1 ml. Check whether the supplier's 60 ml figure is the intended fill volume or the brimful capacity.

Sources