Buyer guides
Decoration & finishes
21 guides
Frosted Glass Jars: Acid Etch vs Spray Coating Guide
Choose acid etching when a frosted jar will be washed, hot-filled or handled hard, because the texture is cut into the glass and has no layer that can lift.
Frosted Wine Bottles Wholesale — Acid Etch vs Spray Frost for Premium Wines
For wine that will be cellared or served from an ice bucket, specify acid etch: the satin surface is the glass itself, so it cannot peel, flake or fade.
Frosting & Color Coating: Cost Drivers per Bottle
What a frosted or coloured bottle costs depends on which process produces the effect, how many decoration passes the design needs, and whether the base bottle is a stock shape or a new mould.
Glass Bottle Acid Etching: Frost Routes and Depth Control
A shallow, even etch does not automatically weaken the bottle; an uneven or over-deep one, or one that reaches the neck finish, can.
Glass Bottle Artwork Handoff Checklist: Keep Bottle, Decoration, and Label Decisions Separate
A sound artwork handoff for a glass bottle names one bottle reference, one artwork revision and one decoration route, and marks every item as approved, proposed or still open.
Glass Bottle Decoration Durability: Build a Sample Approval Plan That Matches Real Handling
Approve the sample against that list, record what was seen at each contact point, and tie the result to one artwork revision.
Glass Bottle Decoration Services
Six decoration processes cover almost every glass bottle project: screen printing, spray coating, acid-etch frosting, hot stamping, decals and electroplating.
Glass Bottle Embossing: Adding Dimension and Brand Identity to Your Packaging
It gives a brand a permanent mark that will not peel, fade or wash off, at the cost of a dedicated or modified mould.
Glass Bottle Label Inspection: Post-Label Verification
The labeler cannot do this itself, because it places whatever the reel or print head supplies and has no knowledge of content.
Glass Bottle Label Material: 2025 Buying Guide
The right label material for a glass bottle depends on what the bottle goes through after labelling, not on the label stock alone.
Glass Bottle Label Panels: What to Confirm Before You Finalize Artwork
Before you finalize artwork, confirm which area of the bottle is meant to carry the label, and which drawing revision defines that area.
Glass Bottle Silk Screen Printing: Ink, Mesh, Wash
How long a screen print lasts on a glass bottle is decided by the ink, not by the printing method.
Glass Bottle Spray Coating: Route, Tests, Acceptance
Spray coating puts a cured film, usually somewhere between roughly 15 and 40 micrometres thick, on the outside of a bottle that has already been formed.
Gradient Glass Bottles Wholesale — Ombre Spray Coating
A gradient (ombre) glass bottle gets its fade from several overlapping spray passes applied through a masking fixture, then oven-cured at 180–220°C.
Hand Sanitizer Glass Bottles | Pumps, Sprays & Labels
Glass is inert to the 60 to 95 percent ethanol or isopropanol in hand sanitizer, so the bottle itself will not stress-crack, let alcohol permeate or shorten shelf life.
Hot Stamping Glass Bottles: Foil Choice and Defect Control
Pick the foil after you have fixed the surface it lands on, not before: a grade that bonds well to a cured lacquer may not hold on bare flint glass, and a mirror foil turns satin on a frost.
Induction Seal Bottles: Foil Seals, Parameters & Checks
Whether the weld is sound is read from the peeled membrane, a peel force figure and a leak or vacuum decay test run after transport as well as at the line.
Label Adhesion Test on Glass: Methods and Judgement
No single test proves that a label will stay on a glass bottle.
Screen Printing Glass Bottles: 4 Decoration Routes Compared
Use them to shortlist a process, then confirm against your own bottle and artwork.
Shrink Sleeve Labels for Glass Bottles: Engineering Guide
A shrink sleeve suits a glass bottle when the body is close to round, the taper is gentle, and the printed film is meant to carry the brand rather than the glass itself.
Stretch Hood Machine for Glass Bottle Pallet Loads
Judge any method by film weight, energy and container space per pallet shipped, not by the machine or the roll.