A shot is 44 millilitres in the United States (1.5 US fluid ounces), 25 or 35 ml in the United Kingdom, 35.5 ml in Ireland, 30 ml in Australia and 20 ml (2 cl) in Germany. Shot glasses often hold more than that when filled to the brim, so the glass size alone does not tell you the pour.
None of these is a law of nature, and only some are laws at all. In the UK and Germany the size of a measure is written into weights-and-measures rules. In the United States, Canada and Australia the familiar number comes from bar custom and from national health guidance on what counts as one standard drink. This guide gives the number for each country, where it comes from, and how to check what your own glass holds.
Shot sizes by country
| Country | Usual single shot | Double | Where the number comes from |
|---|---|---|---|
| United States | 1.5 US fl oz = 44.4 ml | 3 fl oz = 88.7 ml | Bar custom; the federal health definition of one standard drink uses a 1.5 oz shot of 40% spirits |
| Canada | 43 ml (1.5 oz) | 86 ml | Canada's Guidance on Alcohol and Health counts 43 ml of 40% spirits as one standard drink |
| United Kingdom | 25 ml or 35 ml | 50 ml or 70 ml | Weights and Measures (Intoxicating Liquor) Order 1988, article 3 |
| Ireland | 35.5 ml | 71 ml | The standard pub measure |
| Australia | 30 ml, called a nip | 60 ml | A 30 ml nip of 40% spirits is one Australian standard drink |
| Germany | 2 cl = 20 ml | 4 cl = 40 ml | Serving sizes allowed under § 27 of the Mess- und Eichverordnung |
United States: 1.5 ounces, by custom
Federal law in the US fixes the sizes of spirits bottles, not the size of a pour. The 1.5 oz figure is what American bars and cocktail recipes treat as one shot, and it is the figure federal health guidance uses. The National Institute on Alcohol Abuse and Alcoholism defines a standard drink as any drink containing 14 grams of pure alcohol, and gives "a 1.5-ounce shot glass of distilled spirits at 40% alcohol by volume" as its example. NIAAA itself notes that standard drinks may not match the serving sizes people actually get.
Converted to metric, using the US fluid ounce of 29.57 ml:
| US fluid ounces | Millilitres | What it is usually called |
|---|---|---|
| 1 oz | 29.6 ml | A short pour, or a pony |
| 1.5 oz | 44.4 ml | A standard shot, or a jigger |
| 2 oz | 59.1 ml | A large shot |
| 3 oz | 88.7 ml | A double |
The British imperial fluid ounce is slightly smaller, 28.41 ml, so an old British recipe that says "1 oz" means about a millilitre less than an American one. At shot sizes the difference rarely matters.
Canada: 43 ml
Canada's Guidance on Alcohol and Health, published by the Canadian Centre on Substance Use and Addiction, defines one standard drink of spirits as 43 ml, or 1.5 oz, at 40% alcohol. That is the number Canadian health material uses for a shot. It is guidance on how much alcohol a drink contains, not a rule on what a bar must pour.
United Kingdom: 25 ml or 35 ml, by law
Britain is one of the few places where the size of a shot is fixed by law. Under article 3 of the Weights and Measures (Intoxicating Liquor) Order 1988, gin, rum, vodka and whisky sold for drinking on the premises may be sold only in 25 ml or 35 ml, or in multiples of one of them. Three details matter:
- One size per pub. The quantity chosen must be the same for every bar in the premises and for all four spirits. A pub that pours 25 ml singles pours 50 ml doubles; a 35 ml pub pours 70 ml.
- The pub must say which. A written statement of the quantity has to be on display where customers can see it before they buy.
- Cocktails are outside the rule. A spirit that goes into a mixture of three or more liquids is exempt, and so is a mixed drink the customer specifically asks for.
The Order once also allowed a quarter, a fifth or a sixth of a gill, the old imperial measures. Those stopped being permitted after 31 December 1994.
Ireland: 35.5 ml
The Irish pub measure of spirits is 35.5 ml, the figure Drinkaware Ireland uses for reference. It is the same quantity as a quarter of an imperial gill (a gill is 142 ml), one of the measures British law allowed until 1994. Ireland counts a standard drink as 10 grams of alcohol.
Australia: the 30 ml nip
Australians order spirits by the nip, and a nip is 30 ml. An Australian standard drink contains 10 grams of alcohol, and Queensland Health's table, adapted from the national standard drinks guide, lists one 30 ml nip of 40% spirits as one standard drink. Health authorities there point out that glasses vary and that a poured drink is often more than one standard drink.
Germany: 2 cl and 4 cl
German shot glasses are marked in centilitres, and the two marks you see everywhere are 2 cl and 4 cl. Both are on the list of serving sizes allowed by § 27 of the Mess- und Eichverordnung, which permits glasses for commercial serving of 1, 2, 4, 5 and 10 cl and a set of litre sizes above that. A 3 cl serving glass is not on the list.
The rules also say what the glass must show. According to the weights and measures office of Rhineland-Palatinate, a serving glass must carry a fill line for each volume it is used for (up to four), the volume and unit next to it, the maker's name or mark, and a conformity marking. Glasses legally placed on the market before November 2016 may still be used if they carry the older calibration line and a registered maker's mark. Cocktails mixed from more than two drinks just before serving are exempt.
Why your shot glass holds more than a shot
Every glass has two capacities: what it holds filled to the brim, and what it is meant to be filled to. Nobody can carry a glass filled to the rim without spilling, so a glass meant for a 1.5 oz pour is often made to hold more than that, with the pour stopping below the rim. That is why a shot glass sold as "2 oz" can be the right glass for a 1.5 oz shot.
The same idea runs through glass packaging. A bottle's nominal capacity is what goes on the label; its brimful capacity is larger, and the gap is headspace. A 50 ml miniature, for example, usually holds 54 to 58 ml to the brim. The mini liquor bottle guide explains why the filling line needs that brimful figure.
How to measure your own shot glass
- Put the empty glass on a kitchen scale and set it to zero.
- Fill it with cold water to the level you would actually pour to.
- Read the weight in grams. One millilitre of water weighs almost exactly one gram, so the reading is the volume in millilitres.
A reading of about 44 g means a US shot, 30 g an Australian nip, 25 or 35 g a British measure. Filled to the very top, most shot glasses will read noticeably more.
A shot and a miniature bottle are not the same size
The 50 ml miniature, also called a nip, a shooter or an airplane bottle, is the smallest standard size for spirits bottles in the United States. It is often described as a single serve, but it holds 1.69 US fl oz: a little more than one American shot, two British 25 ml measures, or a nip and two thirds in Australia.
The word shot is also used outside alcohol. Ginger, turmeric and other wellness shots are usually sold in 60 ml bottles, the "2 oz shot" of the cold case; their glass, caps and filling are covered on our glass shot bottles page. For the rest of the size range, from the miniature to the 1.75 litre handle, see the liquor bottle size guide, and for why the full-size bottle is 750 ml in one country and 700 ml in another, spirits bottle sizes by country.
If you are planning miniatures or sample bottles for a spirits range, send the size, the closure and the markets through the quote form.
If you are comparing options, see also Custom Whiskey Bottle Molds for Distilleries & Private Label and Vodka Bottle Sizes.
FAQ
How many ml is a standard shot?
In the United States, 1.5 US fl oz, or 44 ml. In the UK a single is 25 or 35 ml depending on the pub, in Ireland 35.5 ml, in Australia 30 ml, in Canada 43 ml by the national standard-drink definition, and in Germany 2 cl (20 ml).
Is a shot 30 ml or 44 ml?
Both, depending on where you are. 30 ml is the Australian nip and close to a 1 oz pour. 44 ml is the American 1.5 oz shot.
How many ml are in a double shot?
About 89 ml (3 US fl oz) in the US, 50 or 70 ml in a British pub, 71 ml in Ireland, 60 ml in Australia and 4 cl in Germany.
How many shots are in a 750 ml bottle?
About 17 American 1.5 oz shots. A 700 ml bottle, the European size, gives 28 British 25 ml measures or 20 measures of 35 ml. The count for every bottle size, from the nip to the handle, is in how many shots in a fifth.
How many ml is a 2 oz shot glass?
2 US fl oz is 59 ml. If the glass holds that only when filled to the brim, it is a comfortable glass for a 1.5 oz (44 ml) pour.
Is a 50 ml mini bottle one shot?
It is close to one American shot (50 ml against 44 ml) and equal to two British 25 ml measures.
Sources
- United States: NIAAA, What is a standard drink?; smallest spirits bottle size: 27 CFR 5.203.
- Canada: CCSA, Canada's Guidance on Alcohol and Health, standard drinks poster.
- United Kingdom: Weights and Measures (Intoxicating Liquor) Order 1988, article 3.
- Ireland: Drinkaware Ireland, standard drinks calculator.
- Australia: Queensland Health, standard drinks.
- Germany: § 27 Mess- und Eichverordnung; Landesamt für Mess- und Eichwesen Rheinland-Pfalz, information on serving glasses (November 2024).