A longneck is a beer bottle with a tall neck, and how much it holds depends on where you ask for one: 12 US fluid ounces (355 ml) in the United States, 341 ml in Canada, and in most of Australia a 750 ml bottle.
Three countries, one word and three different bottles. Each of them got there by its own route: an American bottle that started as a returnable and became a Texas slogan, a Canadian bottle that pushed out a national icon and then became one, and an Australian name for the big bottle you share. If you are ordering glass and the brief just says "longneck", it is worth knowing which one the buyer has in mind.
The short version
| Where | What "longneck" means | Capacity | Notes |
|---|---|---|---|
| United States | The tall 12 oz bottle with a long, slightly swelled neck | 355 ml | Today mostly one-way glass with a 26 mm crown |
| Canada | The industry standard bottle shared by brewers | 341 ml | Returnable, uniform dimensions since 1992 |
| Australia | The large bottle, as opposed to the stubbie | 750 ml | Also called a tallie, especially in Queensland |
United States: from the Export bottle to the longneck
The American longneck descends from the Export bottle. According to a history of beer bottles published by the Society for Historical Archaeology, the style is credited to the Milwaukee brewer Valentine Blatz in 1871, the year the same source says he produced the first bottled lager in America. By the turn of the century it was the most common beer bottle in the country, and after Prohibition it was so dominant that the trade often called it simply the "standard" beer bottle. A 1930s Export stood about 9½ inches tall and weighed 12 to 14 ounces of glass.
Then came the beer can, and the glass industry answered with the short, light Stubby in 1935. A 12 oz Stubby weighed 10½ ounces and stood under 7 inches. The authors make a point that is still useful to anyone choosing a bottle today: the weight saving came almost entirely from shortening the neck, not from thinner glass. A long neck costs glass.
The tall shape survived because of where beer was drunk. In 1942 the War Production Board limited beer bottles to four styles, the Export among them. After the war, glassmakers brought out tall one-way "Tavern" bottles in 1947, because bar owners had long objected that the short non-returnables did not "look good on the table". The long neck was, in part, a presentation choice from the start.
Texas makes it a slogan
By the 1970s, "longneck" in the American trade meant a returnable bottle, the kind that went back to the brewery in a case and came out again. Texas Monthly tells how Lone Star, then brewed in San Antonio, leaned into exactly that. Its "Long live long necks" campaign came out of the Armadillo World Headquarters music hall in 1973 or 1974, depending on the account, and in 1975 the brewery's sales rose 2% across Texas and 46% in Austin after five straight years of decline. Dictionary.com still labels the word chiefly Texan.
The North American trade still refers to the longneck as the industry standard bottle, as Texas Monthly's columnist put it, though we found no formal US specification behind that name. What exists is a widely shared shape. Anchor Glass's 2023 catalogue, for example, lists a 12 fl oz long-neck non-returnable bottle at 9.000 inches (228.6 mm) tall and 2.382 inches (60.5 mm) across, weighing 7 ounces (198 g), with either a 26-502 or a 26-611A crown finish.
Canada: the stubby, the switch and the standard bottle
Canada did it the other way round. In 1958 the Dominion Brewers Association set out to develop one bottle for the whole industry, and in 1961 the stubby arrived. The Globe and Mail described it at the time as a lighter bottle holding the same 12 ounces. For more than twenty years it was simply what Canadian beer came in.
The change came in the mid-1980s, and it was about marketing. American-style long-necked bottles let a brand look different on the shelf, and when the big brewers began putting brands into them, the stubby was phased out within a few years. CBC News notes the new bottles held the same 341 ml but offered more branding appeal.
The freedom did not last. By the early 1990s the Brewers Association of Canada counted around 50 bottle types where there had been one stubby, and in 1992 the longneck itself was standardised: all of them got the same height, weight and width, so any brewer's bottle could go back into the shared returnable system. That bottle is still in use. It is a 341 ml brown longneck, and breweries that want to use it sign an agreement with the national trade association, Beer Canada. Oland, one of the brewers using it, told CBC that the bottles are refilled 17 times on average.
Australia: the 750 ml longneck
In Australia the bottles are named by size. A stubbie, or stubby, is the short 375 ml bottle. A longneck is the 750 ml one, the bottle you buy to share. Usage varies by region: readers of the Macquarie Dictionary's regional word map report "long neck" from Sydney, Melbourne and Adelaide, while in Brisbane the same bottle is a "tallie". Green's Dictionary of Slang gives the Australian tallie as a 750 ml bottle of beer.
Brewers themselves tend to stay literal. Coopers, for example, lists the size as a 750 ml bottle, and it is the bottle shops that label it a longneck. If an Australian customer asks for longnecks, confirm the capacity in millilitres before anything else.
The crown on top
Every version above closes with a crown cap, the fluted steel cap William Painter patented in 1892. Two developments decide which crown you need today:
- Pry-off or twist-off. The twist-off crown arrived in 1966, when Armstrong Cork introduced its "Turn-Off" crown and a matching threaded finish. Carling launched it in the same year as its "Twist Cap". A twist-off crown needs a bottle made with the threaded finish; a pry-off crown sits on a plain finish. The two are not interchangeable on the bottle side.
- The 26 mm finish. The common beer crown is 26 mm, and ISO 12822:2020 sets the dimensions of the 26 mm shallow crown finish for glass beverage bottles. Suppliers also use their own finish codes, like the 26-502 and 26-611A in the catalogue above. Give your crown supplier the bottle's finish drawing, not just "26 mm".
Crown and finish details are covered on our crown cap bottle page.
Ordering a longneck: what to decide first
Which longneck
Start with the capacity in millilitres and the market: 355 ml for the US, 341 ml for the Canadian standard bottle, 750 ml for an Australian longneck, or a long-necked 330 ml bottle for markets that think in centilitres. Our beer bottle size guide sets out how to specify a format in full.
Returnable or one-way
A returnable bottle is built heavier to survive washing and many trips, and in a shared pool like Canada's you use the standard bottle or you are outside the system. A one-way bottle can be lighter and can be a custom shape. Decide this before anything else, because it sets the glass weight and the mould.
Longneck or stubby
The history is a fair guide. The long neck gives presence on a bar table and a classic look; the short neck saves glass and height, which means more layers per pallet and less weight in every shipment. Our page on stubby beer bottles compares the two shapes on the packaging line.
What to send with a quote request
- Capacity, market and whether the bottle is returnable or one-way.
- The crown type, pry-off or twist-off, and your crown supplier if you already have one.
- Glass colour. Amber is the usual choice for beer, for light protection.
- Label layout, including any neck label, because a long neck gives room for one.
- Your filler and labeller, so the bottle can be checked against the line.
Send those through the quote form and we will match the brief to a plant already running the format. Stock shapes are in the beer bottle collection, and the US size is covered on our 12 oz glass bottle page. For draft beer sold to take away, see growler sizes.
For neighbouring questions, see Food & Beverage Glass Packaging and Wholesale Glass Beverage Bottles.
FAQ
How many ml is a longneck?
In the United States, 355 ml (12 US fl oz). In Canada, 341 ml. In Australia the word usually means a 750 ml bottle.
What is the difference between a longneck and a stubby?
The neck. In the US and Canada both hold the same 12 oz or 341 ml; the stubby is shorter and lighter because the neck is shorter. In Australia the names mark different sizes: a stubbie holds 375 ml and a longneck 750 ml.
Why did Canada switch from stubbies to longnecks?
For branding. In the mid-1980s brewers moved brands into long-necked bottles to stand out, and the stubby was phased out. In 1992 the industry standardised the longneck so that bottles could be shared again.
Are longnecks pry-off or twist-off?
Either. Both use a crown, but a twist-off crown needs a bottle with a threaded finish. Check the finish with your crown supplier before you order.
Sources
- US bottle history: Schulz, Lockhart, Serr, Lindsey and Schriever, A History of Non-Returnable Beer Bottles, published on the Society for Historical Archaeology bottle site; crown dates: SHA guide to dating closures; Carling's Twist Cap: Cleveland Historical.
- Texas: Texas Monthly, "Bottle Rocket"; Texas Monthly, The Texanist on the longneck.
- Canada: CBC News on the stubby, 2025; Dictionary of Canadianisms on Historical Principles, "stubby"; CBC News on the industry standard bottle, 2016.
- Australia: Green's Dictionary of Slang, "tallie"; the Macquarie Dictionary's Australian Word Map, entry "long neck".
- Crown finish: ISO 12822:2020, glass containers, 26 mm shallow crown finishes; the longneck dimensions are from the Anchor Glass product catalogue, revision of June 2023.